About AFRISOhome
The AFRISOhome principle: 1. Product(s) With AFRISOhome, products from different radio technologies and manufacturers can be controlled and linked. AFRISOhome supports EnOcean, Z-Wave, ZigBee and wireless M-Bus. The select
The AFRISOhome principle:
1. Product(s)
With AFRISOhome, products from different radio technologies and manufacturers can be controlled and linked.
AFRISOhome supports EnOcean, Z-Wave, ZigBee and wireless M-Bus. The selection of compatible sensors and actors is continually extended. An overview of currently supported devices can be found here: www.afriso.de/afrisohome-whitelist.
2. AFRISOhome
The AFRISOhome Gateway can either be operated locally or integrated into an existing network structure via LAN or Wi-Fi.
A GSM variant is available for autonomous operation.
The collected data are stored exclusively on the AFRISOhome gateway to protect privacy.
3. App
Select the desired temperature, control your lighting, monitor the house technology and detect water leaks and fires - the complete home in one app.
Via intuitive if-then rules, recurring scenes can be easily automated.
Feb 28, 2024
Version 2.40.1
## Changed
- When logging in, a warning is displayed if read-only mode (bug) occurs
## Devices
FlexTron (EnOcean):
- ALADIN Sendemodul
- ALADIN Funk-Bewegungsmelder
Shelly Wave (Z-Wave GEN7):
- Shelly Wave Shutter
- Shelly Wave 1
- Shelly Wave 1PM
- Shelly Wave 2PM
Shelly:
- Shelly Wall Display
- Shelly PM Mini (Gen 3)
- Shelly H&T (Gen 3)
- Shelly 1PM Mini Gen3
- Shelly 1 Mini Gen3
- Shelly PM Mini Gen3
- Shelly H&T Gen3
Andere:
- Fritz!DECT 440
## :bug: Bugfixes
- Shelly 1 no longer shows current consumption (Shelly 1 cannot measure this) *
- Shelly 3EM now correctly displays summed consumption and total consumption*
- Shelly 3EM can now also display negative consumption *
- Support for buttons on 2nd generation Shellies (e.g. Shelly Plus i4) *
- Double, triple and long click can now be used
- The status of the Shelly 2.5 in shutter mode is now displayed correctly
- On the Shelly TRV, the target temperature can now be set in 0.5° increments *
- Deactivating the watchdog now works on the Shelly TRV with an active heating plan; This means that a manually set target temperature is not immediately overwritten
**_For *: Device must be queried again using the WebApp_**
Previous Versions
Here you can find the changelog of AFRISOhome since it was posted on our website on 2020-03-04 21:01:40.
The latest version is 2.40.1 and it was updated on 2024-04-19 17:13:28. See below the changes in each version.
AFRISOhome version 2.40.1
Updated At: 2024-02-28
Changes: Feb 28, 2024
Version 2.40.1
## Changed
- When logging in, a warning is displayed if read-only mode (bug) occurs
## Devices
FlexTron (EnOcean):
- ALADIN Sendemodul
- ALADIN Funk-Bewegungsmelder
Shelly Wave (Z-Wave GEN7):
- Shelly Wave Shutter
- Shelly Wave 1
- Shelly Wave 1PM
- Shelly Wave 2PM
Shelly:
- Shelly Wall Display
- Shelly PM Mini (Gen 3)
- Shelly H&T (Gen 3)
- Shelly 1PM Mini Gen3
- Shelly 1 Mini Gen3
- Shelly PM Mini Gen3
- Shelly H&T Gen3
Andere:
- Fritz!DECT 440
## :bug: Bugfixes
- Shelly 1 no longer shows current consumption (Shelly 1 cannot measure this) *
- Shelly 3EM now correctly displays summed consumption and total consumption*
- Shelly 3EM can now also display negative consumption *
- Support for buttons on 2nd generation Shellies (e.g. Shelly Plus i4) *
- Double, triple and long click can now be used
- The status of the Shelly 2.5 in shutter mode is now displayed correctly
- On the Shelly TRV, the target temperature can now be set in 0.5° increments *
- Deactivating the watchdog now works on the Shelly TRV with an active heating plan; This means that a manually set target temperature is not immediately overwritten
**_For *: Device must be queried again using the WebApp_**
AFRISOhome version 2.40.0
Updated At: 2023-09-07
Changes: Sep 7, 2023
Version 2.40.0
## Devices
- Shelly Pro 3EM
- Shelly Vintage A60
- Shelly Vintage ST64
- Shelly Plus i4
- Shelly Plus i4DC
- Shelly Pro 4PM
- Shelly Plus 2PM
- Omnio UPS230/08
- Omnio UPS230/12
- Omnio UPS230/10
- Omnio REGS12/08M
- Omnio REGS12/04M
- Omnio KXJ230/12
- Omnio UPJ230/12
- Omnio REGJ12/04M
- Omnio UPD230/10
- Omnio RTF-161
- Omnio RTF-160
- Omnio UPH230/10
- Omnio UPH230/12
- Omnio REGH12/08M
- Omnio miniT01
- Omnio TST230/12
- Omnio TST230/10
- Flextron ALADIN Flextron ALADIN button single
- Flextron ALADIN Flextron ALADIN button double
- Flextron ALADIN Flextron ALADIN mini remote control
- Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300385
- Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300386
- Flextron ALADIN Turo multisensor / 300395
- Flextron ALADIN EnO recipient 1-channel / 300611
- Flextron ALADIN EnO recipient 1-channel pot.free / 300613
- Flextron ALADIN EnO recipient 2-channel / 300621
- Flextron ALADIN EnO blinds-recipient / 300631
- Flextron ALADIN blinds-recipient / STAK-STAS Hirschmann / 300635
- Flextron ALADIN wireless smoke detector / 300726
- Flextron ALADIN wave / proximity switch / wireless / 300050
- Flextron ALADIN Fensterkontakt II / 300754
- Flextron ALADIN EnO recipient 2-channel / 24V / 300671
- Flextron ALADIN EnO recipient 2-channel / 12V / 300676
- Flextron ALADIN EnO DALI controller broadcast / 300505
- Flextron ALADIN EnO heating receiver 1-channel pot.free / 300683
# improvements
- A matter bridge that allows some homee devices to be used in other smart home systems.
AFRISOhome version 2.39.1
Updated At: 2023-06-07
Changes: Jun 7, 2023
Version 2.39.1
- Fixed a display error when updating values from BiSecur devices.
AFRISOhome version 2.39.0
Updated At: 2023-04-04
Changes: Apr 4, 2023
Version 2.39.0
## Features
+ Weather forecasts are now available for the current day (morning, afternoon, evening, night).
+ Alarms can be reseted by homeegrams.
+ Device history can be disabled globally.
## Devices
+ Abus PLSG10100 Nexello Outdoor Siren
+ Abus PLMK10000 Z-Wave covert Door/Window Sensor
+ ABUS Nexello Info Indoor Sirene PLSG10000
+ Abus PLMK10100 Nexello Bypass opening detector
AFRISOhome version 2.38.0
Updated At: 2022-11-16
Changes: Nov 16, 2022
Version 2.38.0
## Features
- SmartStart devices can now also be added via the QR code via the barcode scanner in the "Add device" area.
## Devices
- Support for Z-Wave Devices with the new GEN7 Cube:
- AeotecWater Sensor 7 Pro (ZWA019-C)
- Aeotec Water Sensor 7 (ZWA018-C02)
- AeotecDoor/Window Sensor 7 Pro (ZWA012-C02)
- FIBARO RGBW Controller 2
- Cyrus SmartHome Flood Sensor
- Aeotec Smart Switch 5 (ZW075)
- Everspring AN 180-2 ON/Off MiniPlug
- Aeotec LED STRIP (ZW121)
- Aeotec Door/Window Sensor 7 (ZWA011)
- Aeotec RGBW Bulb E27 (ZWA002)
- FIBARO Motion Sensor
- FIBARO Dimmer 2
- EUROtronic Spirit Z-Wave Plus
- Aeotec Siren
- TKBHOME On/Off Plug
- Secure Controls Secure Smart Plug 302 Socket Energy Meter
- Qubino Smart Plug 16A
- POPP Rauchwarnmelder mit Innensirene
- Permundo Smart Mini Plug PSC132ZW
- Hoppe Fenstergriff ConnectSense
- FIBARO Wall Plug
- FIBARO Smoke Sensor
- FIBARO Single Switch 2
- FIBARO Roller Shutter 2
- FIBARO Double Relay Switch
- FIBARO Door/Window Sensor 2
- Eurotronic Luftgütesensor Z-Wave Plus
- Devolo Schalt- und Messsteckdose
- Devolo Heizkörperthermostat
- Devolo Fenster/Türkontakt
- Cyrus Zwischenstecker
- Cyrus Tür/Fensterkontakt
- Cyrus 4-in-1 Multisensor
- Aeotec Smart Switch 7
- Aeotec Smart Switch 6
- Aeotec Recessed Door Sensor 7
- Aeotec MultiSensor 6
- Aeotec Home Energy Meter
- Aeotec Heizkörperthermostat
- Aeotec Door/Window Sensor 7 (ZWA008)
- Aeotec Door/Window Sensor 6
- ABUS Z-Wave Wassermelder
- ABUS Z-Wave Tür-/ Fensterkontakt
- ABUS Z-Wave Rauchmelder
- ABUS Z-Wave Innensirene
- AeotecDoor/Window Sensor 7
- Strip Guard 700
- Other devices:
- Support for AVM FRITZ!DECT 302
- Support for NUKI SMART LOCK 3.0
- Support for Shelly Motion 2
- Support for Shelly H+T Plus
AFRISOhome version 2.37.1
Updated At: 2022-08-18
Changes: Aug 18, 2022 Version 2.37.1
# Added
* Added support for Shelly second-generation devices
* Added support for Omnio devices
* Update polish translations
# Fixed
* Added missing button to be able to learn Shelly door/window sensor
AFRISOhome version 2.36
Updated At: 2022-04-05
Changes: Apr 5, 2022 Version 2.36
## Changed
* The watch app can now be started directly on the Apple Watch without performing an action
* The values of BiSecur devices can now be queried regularly
* Support for new devices
* Ability to switch-off push-notifications and email-notifications from Watchdog per user
## Fixed
* Further display errors in the controls of garage doors have been fixed
* Minor text fixes
AFRISOhome version 2.34.1
Updated At: 2021-10-12
Changes: Oct 12, 2021 Version 2.34.1
## Added
* Support for new Centronic Plus devices
## Changed
* The icons of the new plans can now also be used for PROgrams and groups
* A descriptive text for the slat tracking in the sun automation has been added
## Fixed
* On the iPad the texts in the tab bar are no longer cut off
* A crash when configuring the sun automation with an awning bundle has been fixed
* The icon of repeaters was not always displayed. This has been fixed
* Minor text fixes
AFRISOhome version 2.34
Updated At: 2021-09-28
Changes: Sep 28, 2021 Version 2.34
## Added
* The scenarios have grown: There is now also a sun automation. With this, shutters and blinds can be easily controlled based on brightness values.
* Something has also changed in the plans: heating plans now also support electric heating. There is also a time plan to switch devices on/off according to a weekly schedule. And with the presence simulation plan, devices can be switched at random times.
* Push messages can now also be sent as critical messages, so that they are always delivered with sound. This can be set for device alarms and individual PROgrams.
* Support for new WiFi and BiSecur devices
## Changed
* There are now icons for awning, awning and weather station
* For the websocket connection, the websocket handling integrated directly in iOS is now used instead of a third-party library in order to improve stability and performance
* The arrangement of the elements on the scenario detail screen has been revised
## Fixed
* Missing texts for the climate mode have been added
* The correct values are now displayed in the diary when BiSecur devices are switched
* The app's start screen is now also dark in dark mode
* The maximum value for the switch-off delay in the wind monitoring has now been adapted to the other platforms
* The color of the radio buttons in the sensor selection of the wind monitoring is now correct
* A back button was incorrectly displayed in the scenario detail screen on iPad
* Restrictions can now be set for all items in the list
* A crash in the search in the PROgrams has been fixed
* Fixed a crash in the setup process
* In the device detail screen, the order of the properties was sometimes undefined
* Minor text fixes
AFRISOhome version 2.33
Updated At: 2021-06-23
Changes: Jun 23, 2021 Version 2.33
## Added
* There is now a new type of automations: scenarios. They should make some use cases more easy. Wind monitoring is the first scenario. When there is strong wind they move shutters, blinds or awnings into a safety position and lock the control.
* Support for new Zigbee, EnOcean, Z-Wave and BiSecur devices
## Changed
* Reset accumulated energy use of devices
* New ventilate function for supported Hörmann garage door operators
* When searching PROgrams, hidden PROgrams can now also be searched directly.
* After the successful scan of a QR or barcode, there is now haptic feedback
* During the AFRISOhome update, the individual steps are now also announced by VoiceOver
* The serial number of the WAREMA WMS Cube is now shown in the settings
* If an attempt is made to teach-in an incompatible WAREMA WMS device, an error message is now displayed
* Further configuration options are now available for WAREMA sun shading devices
* Additional device types are now available in demo mode
## Fixed
* When establishing a connection to larger AFRISOhome installations or via a slow connection, there is no longer a timeout
* Icon selection now also works with VoiceOver
* Fix selection of weekdays in PROgrams when VoiceOver is active
* Teaching-in of Belkin WeMo devices is now possible again
* When teaching in homee ENERGIEMANAGER, Belkin WeMo and WOLF devices, all texts are now displayed again
* Errors in the configuration of the WiFi in standalone mode have been fixed
* A few display errors have been corrected in the list of registered AFRISOhomes
* The back navigation via gestures in the setup process is now deactivated to avoid unwanted states
Announcement: Release 2.33 will be the last version with support for iOS 12. From 2.34 onwards iOS 13 is required.
Disclaimer
Official App Store Link
We do not host AFRISOhome on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for AFRISOhome is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
